Our company produces a new type of liquid organic acid anhydride curing agents for epoxy resins with excellent performance Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA). Because the anhydride hardener has better heat resistance and chemical stability than the amine curing agent, and can maintain excellent physical and electrical properties at higher temperatures. In recent years, it has been insulated with the motor, electronics and electrical industries. The continuous improvement of structural reliability requirements has led to the rapid development of the application of such curing agents. The specific introduction of our MTHPA product WNY-1001 is below:
Chemical Name: Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA)
Specification: WNY-1001
Molecular formula: C9H10O3
Molecular weight: 166.178
CAS No.: 26590-20-5 11070-44-3
EC：247-830-1
Structural formula:
PHYSICAL AND CHEMICAL PROPERTIES:
-High purity and light color: The color of anhydride cured epoxy products is light yellow, which can be directly produced or produced into various colors required.
-Low viscosity: Good processing properties for casting, potting, winding, bonding, lamination, impregnation, molding and dipping. A large amount of filler can be added during casting to make the cured product excellent in performance.
-Stable performance, low solidifying point, long application period: long-term storage at room temperature.
-Low toxicity: Toxicity is only one-twentieth to one-fortyth of the amine curing agent.
-Low volatility: Sealed preservation.
-Low heating loss.
-Good mutual solubility: This product can be miscible with all epoxy resins, the mixing viscosity is low, and the shrinkage rate of the system is small when heated and cured.
-Application: More suitable for white encapsulation.
TECHNICAL DATA SHEET:
|
Item
|
WNY1002
|
WNY1001
|
WNY1008
|
|
Appearance
|
light yellow transparent liquid, no mechanical impurities.
|
|
Color (Pt-Co)
|
300# Max
|
200# Max
|
|
Density (g/cm3 , 20℃)
|
1.21±0.05
|
|
FreezingPoint(℃)
|
-15 Max
|
0 Max
|
|
Viscosity (Pa.s, 25℃)
|
0.060 Max
|
0.045 Max
|
0.040 Max
|
|
Acid Value(mgKOH/g)
|
660-685
|
|
Anhydride content
|
41.5% Min
|
|
Volatile content (120℃)
|
2.00% Max
|
|
Free acid
|
0.50% Max
|
* Above are standard grades, anhydride mixtures and different isomer structures can be offered.
(Mixture of 3- and 4- Isomers)
Jiaxing Nanyang Wanshixing Chemical Co., Ltd. was founded in 2004, as one subsidiary of Zhejiang Nanyang Group. It is the second chemical factory after Jiaxing Nanyang Plastic Chemical Co. Ltd..
Our company is located in National Chemical Industrial Park , Zhapu Harbor Area , Jiaxing, Zhejiang Province which is about 100 kilometers away from Shanghai, Ningbo and Hangzhou, holding the great advantage of convenient transportation.
Jiaxing Nanyang Wanshixing Chemical Co. Ltd covers an area of 4 acres with more than 60 employees. We have four advanced production lines and our annual production capacity is 30000 tons, is the largest epoxy hardener manufacturer in MTHPA products in China.
