Product Description

Our company produces a new type of liquid organic resin acid anhydride curing agent with excellent performance Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA). Because the anhydride curing agents for epoxy resins has better heat resistance and chemical stability than the amine curing agent, and can maintain excellent physical and electrical properties at higher temperatures. In recent years, it has been insulated with the motor, electronics and electrical industries. The continuous improvement of structural reliability requirements has led to the rapid development of the application of such curing agents. 

 

The specific  introduction of our MTHPA product WNY-1001 is below:

 

Chemical Name: Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA)

Specification: WNY-1001

Molecular formula: C9H10O3

Molecular weight: 166.178

CAS No.: 26590-20-5  11070-44-3

EC：247-830-1

 

PHYSICAL AND CHEMICAL PROPERTIES:

-High purity and light color: The color of clear epoxy glue is light yellow, which can be directly produced or produced into various colors required.

-Low viscosity: Good processing properties for casting, potting, winding, bonding, lamination, impregnation, molding and dipping. A large amount of filler can be added during casting to make the cured product excellent in performance.

-Stable performance, low solidifying point, long application period: long-term storage at room temperature.

-Low toxicity: Toxicity is only one-twentieth to one-fortyth of the amine curing agent.

-Low volatility: Sealed preservation.

-Low heating loss.

-Good mutual solubility: This product can be miscible with all clear epoxy resin and hardener, the mixing viscosity is low, and the shrinkage rate of the system is small when heated and cured.

-Application: More suitable for white encapsulation.

 

TECHNICAL DATA SHEET:

Item	WNY1002	WNY1001	WNY1008
Appearance	light yellow transparent liquid, no mechanical impurities.
Color (Pt-Co)	300# Max	200# Max
Density (g/cm3 , 20℃)	1.21±0.05
FreezingPoint(℃)	-15 Max		0 Max
Viscosity (Pa.s, 25℃)	0.060 Max	0.045 Max	0.040 Max
Acid Value(mgKOH/g)	660-685
Anhydride content	41.5% Min
Volatile content (120℃)	2.00% Max
Free acid	0.50% Max

 

 

* Above are standard grades, anhydride mixtures and different isomer structures can be offered.
(Mixture of 3- and 4- Isomers)

 

Jiaxing Nanyang Wanshixing Chemical Co., Ltd. is very professional in producing hexahydrophthalic anhydride. We welcome merchants from all over the world to cooperate with our factory for mutual benefit and win-win, and jointly create a better future.

Payment Terms︰ TT